Adhesive Processing - Mixing & Dispensing Technologies Short Course
Register Tell a Friend About This EventTell a Friend
Adhesive Processing - Mixing & Dispensing Technologies Short Course

 Export to Your Calendar 6/19/2018 to 6/20/2018
When: June 19-20, 2018
Where: DoubleTree by Hilton Cleveland Downtown-Lakeside
United States
Contact: Malinda Armstrong
(301) 986-9700 x106


Online registration is available until: 6/2/2018
« Go to Upcoming Event List  

Adhesive Processing - Mixing & Dispensing Technologies

ASC Stand Alone Short Course | June 19 - 20, 2018
Cleveland, Ohio

Adhesives are made from very diverse chemistries that utilize heat, liquid carriers or reactions to enable a manageable working viscosity for application to substrates for bonding. Understanding the fundamentals of polymer science; morphology, structure/property relationships, is essential to predict and tune dispensing viscosity, green strength build and final performance characteristics for specific application/markets. While the primary adhesive properties are attributed to the polymer, it is necessary to formulate with additive such as fillers, rheology modifiers, adhesion promotors and often stabilizers to best balance the desired dispensing requirements with performance targets.

In this 2-day short course, the thermal, mechanical and rheological considerations of mixing the formulation packageand common application/dispensingprocesses will be discussedby technology types. The effect of drying/solidification process on changes in chemistry, molecular weight and morphology and the resulting impact on adhesion, shrinkage and induced stresses will be addressed as a function of mixing and dispensing processes.

Membership Software Powered by YourMembership  ::  Legal